Fujitsu MHM215OAT, MHM200AT, MHM2100AT manual Information to be read by Identify Device command 2

5.3 Host Commands

Table 5.4 Information to be read by IDENTIFY DEVICE command (2 of 8)

Word	Value	Description
23-26	–	Firmware revision (ASCII code, 8 characters, left)
27-46	Set by a device	Model name (ASCII code, 40 characters, left)
47	X’8010’	Maximum number of sectors per interrupt on
		READ/WRITE MULTIPLE command
48	X’0000’	Reserved
49	X’0B00’	Capabilities *3
50	X’0000’	Reserved
51	X’0200’	PIO data transfer mode *4
52	X’0000’	Reserved
53	X’0007’	Enable/disable setting of words 54-58 and 64-70, 88 *5
54	(Variable)	Number of current Cylinders
55	(Variable)	Number of current Head
56	(Variable)	Number of current sectors per track
57-58	(Variable)	Total number of current sectors
59	*6	Transfer sector count currently set by READ/WRITE
		MULTIPLE command *6
60-61	*2	Total number of user addressable sectors (LBA mode only)
		*2
62	X’0000’	Reserved
63	X’xx07’	Multiword DMA transfer mode *7
64	X’0003’	Advance PIO transfer mode support status *8
65	X’0078’	Minimum multiword DMA transfer cycle time per word :
		120 [ns]
66	X’0078’	Manufacturer’s recommended DMA transfer cycle time :
		120 [ns]
67	X’00F0’	Minimum PIO transfer cycle time without IORDY flow
		control : 240 [ns]
68	X’0078’	Minimum PIO transfer cycle time with IORDY flow control
		: 120 [ns]
69-79	X’0000’	Reserved
80	X’003C’	Major version number *9
81	X’0000’	Minor version number (not reported)
82	X’346B’	Support of command sets *10
83	X’4008’	Support of command sets *11
84	X’4000’	Support of command sets/function

C141-E104-02EN 5-33