5.3 Host Commands
| Table 5.24 Format of SCT STATUS Response (1/2) | |
|
| |
Byte(hex) | Contents | |
|
| |
00, 01 | Format Version | |
|
| |
02, 03 | SCT Version | |
|
| |
04, 05 | SCT Spec | |
|
| |
| Status Flag | |
| ||
| Bit0: Initialized flag (maintained | |
06 to 09 | 0 = When any user LBA is written, this bit is cleared. | |
| ||
| This bit is also cleared if the capacity of the drive is changed via | |
| SET MAX (EXT), DCO. | |
| 1= A WRITE SAME command to all logical blocks has completed | |
| without error. | |
|
| |
| Drive State | |
| 00h = Active | |
| 01h = not support (Standby). | |
0A | 02h = not support (Sleep). | |
03h = DST executing in background | ||
| ||
| 04h = SMART | |
| 05h = SCT command executing in background | |
| ||
|
| |
0B to 0D | Reserved | |
|
| |
| Extended Status Code | |
0E, 0F | Status of last SCT command issued | |
| * (See Table 5.25) | |
|
| |
10, 11 | Action Code | |
Action code of last SCT command issued | ||
| ||
|
| |
12, 13 | Function Code | |
Function code of last SCT command issued | ||
| ||
|
|