OTHER ADJUSTMENTS (Continued)
(4)Press Cor Dto select “Moving Area”.
(5)Press Eor Fto select the range for moving the pattern.
Each time you press Eor F, one of the available choices appears in the following sequence:
Min. Std. Max.
[Min.]: Pattern moves in small range. (About 5 pixels)
[Std.]: Pattern moves in moderate range. (About 10 pixels)
[Max.]: Pattern moves in wide range. (About 15 pixels)
(6)Press <to store.
*When the Screen Orbiter function is operated, some screen contents at the top, bottom, right or left of the screen may move offscreen.
Setting RGB Input Signal Compulsorily (Direct Setting)for RGB
You can use this option to switch the setting for RGB input signal.
Each time you press Eor F, one of the available choices appears in the following sequence:
Auto VGA WVGA 480P XGA WXGA SXGA SXGA+
[Auto]: The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal. Press <to store.
*In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished. Switch to the fixed display when the image is not displayed properly.
*Signals that are not applicable depending on the model or input terminals may not be displayed.
Specifying RGB Input Signal (Code Setting) | for RGB |
Normally, use this option in Auto mode.
Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor
Each time you press Eor F, one of the available choices appears in the following sequence:
Off On
Press <to store.
Minimizing phosphor burn-in (Background)
When the screen size was set to “Normal”, to reduce
Each time you press Eor F, the settings is switched.
Black Dark Gray Light Gray
Press <to store.
Displaying System Status (Information)
Displays system operation status.
Select “Information” and press <.
The “Information” screen will appear.
[Mode]: | Input mode appears at the upper right corner of the screen |
[Freq. Scan Mode]: Frequency scanning | |
[Input Signal]: | Video mode |
[Input Sync]: | Signal type |
[Freq.]: | Synchronized signal frequency, polarity |
[Preset No.]: | RGB code number |
Note
Information screen (Video Mode)
•If the operation is not executed for about 60 seconds, the menu disappears.
•Depending on the model or the optional devices, some of the functions may not be available.
•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
