Adjusting the Picture | Fujitsu P42XHA58E Series, P50XHA58E Series

ADJUSTING THE PICTURE

•Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU on page E-15 for the basic procedures.

Adjusting the Signal Contrast

Press Fto increase the input signal contrast.

Press Eto reduce the input signal contrast.

Press <to store.

Adjusting the Drive Contrast

Press Fto raise the display’s luminance level, and increase the contrast.

Press Eto lower the display’s luminance level, and reduce the contrast.

Press <to store.

* If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.

Adjusting the Brightness

Press Fto increase the brightness.

Press Eto reduce the brightness.

Press <to store.

Adjusting the Color

Press Fto darken the color.

Press Eto lighten the color.

Press <to store.

Adjusting the Tint

Press Fto change the tint to a more greenish color.

Press Eto change the tint to a more purplish color.

Press <to store.

Adjusting the Sharpness

Press Fto sharpen the Sharpness.

Press Eto soften the Sharpness.

Press <to store.

Adjusting the Ambient Sensor

Ambient Sensor can be set.

Automatically adjusts the picture quality to an optimized level that matches the brightness of the ambient light. Each time Eor Fis pressed, the setting is switched.

On Off

Press <to store.

E-16

Image 16

Fujitsu P42XHA58E Series, P50XHA58E Series user manual Adjusting the Picture

Contents

USER’S Manual Checking Accessories Information Installation Attaching the Ferrite Cores Display Section Front Part Names and FunctionsDisplay Section Back Display Section Bottom Pin No Input signal Pin No SignalDescription of Input Terminals Trademark Infomation Using the Remote Control Remote Control Putting Batteries in the Remote Control PrecautionsEffective Range for the Remote Control Display front Display side VCR/PC DVD RECORDER/PLAYER, Satellite TunerDisplay bottom Turning the Power on and STAND-BY Adjusting the VolumeVideo Input Mode Basic Operations RGB Input Mode Press to select the input modePicture Mode Convenient Functions Switching Between Screen Sizes Watching Pictures on the Wide ScreenPress Size Screen Size Aspect Ratio Adjustment Menu Menu Basic Procedures of Adjustment Menu Adjusting the Picture Precision Setting Setting the Picture ModeSetting the Picture Memory Precision Setting Setting the User Color Temp Adjusting the Color TempSetting the Color Focus Making the Progressive Scan Settings Adjusting Screen Position Position Adjusting Screen Position and SizeAdjusting Screen Size Size Adjusting Audio Adjusting Treble TrebleAdjusting Bass Bass Adjusting Volume Balance Balance Other Adjustments AdjustmentSetting Display Information OSD On Screen Menu Setting the Input Terminals Selecting the settings of Video/S-video Input terminalSelecting the settings of D-SUB Input terminal Selection of indications Name Select Other Settings Auto Off-NO SIGSelecting input terminals Audio Input Minimizing phosphor burn-in Screen Orbiter Setting RGB Input Signal Compulsorily Direct Settingfor RGB Specifying RGB Input Signal Code SettingDisplaying white over entire screen White Screen Minimizing phosphor burn-in Background Press Eor Fto select Factory Initialization of User Adjustment ValuePress Cor Dto select the Yes Options Main Supported Signals Frequency kHz Frequency Hz Specifications Model Series NameProduct Name P42XHA58EBb P50XHA58EBb Regulation Before Obtaining Service Cleaning and MaintenanceProblem Action