ADJUSTING THE PICTURE (Continued)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use Eand Fto adjust Red.
[Green]: Use Eand Fto adjust Green.
[Blue]: Use Eand Fto adjust Blue. Press <to store.
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
•24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals. Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
•30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals. Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
•Jaggies Filter
Progressive Scan Settings Screen
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a smoother motion picture display.
Each time Eor Fis pressed, the setting is switched.
Auto Off
Press <to store.
•Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting. Press F: to specify still picture priority.
Press E: to specify motion picture priority. Press <to store.
Note
•If the operation is not executed for about 60 seconds, the menu disappears.
•Depending on the model or the optional devices, some of the functions may not be available.
•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
