Using the ScanSnap in Various Ways (for Windows users)
205
8. Press the [Scan/Stop] button on the ScanSnap to finish scanning.
Scanned image is saved.zThe scanned image is output at the center of the page in the size specified in the
[Paper size] drop-down list of the [Carrier Sheet Settings] dialog box.
zWhen [Automatic detection] is specified in the [Paper size] drop-down list of the [Car-
rier Sheet Settings] dialog box, the image is output in an optimal size selected auto-
matically from the available standard sizes in the [Paper size] drop-down list.
However, depending on the document, the size of the saved image data may be
smaller than the original document or part of the image may be missing.
Example: When you scan an A5 size image printed in the middle of an A4 size
document, the scanned image is saved in A5 size.
To save the scanned image in its original size, specify the document size in the [Paper
size] drop-down list.
Place the document over a blank sheet if the following is observed:
zScanned image is not saved in the same size as the document (when [Automatic
detection] is specified in the [Paper size] drop-down list of the [Carrier Sheet Settings]
dialog box)
zThere are shadows around the edges of the scanned image
zThere are black lines around the scanned image of a uniquely shaped cutting
Blank sheet