Documents for Scanning
29
Conditions for Using the Carrier Sheet

The Carrier Sheet (sold separately) is a sheet designed to transport documents through the

ScanSnap.

You can scan documents that are larger than A4/Letter size, photographs and clippings.

Conditions for documents that can be scanned using the optional Carrier Sheet are as follows:

CAUTION

zDo not use a damaged Carrier Sheet because it may damage or cause the scanner to
malfunction.
zBe careful not to cut your finger on the edge of the Carrier Sheet.
*1: For details about how to eject documents, refer to "Output Guide" (page 20).
*2: Fold in half to scan.
Eject method (*1) With the output guide closed
Paper type Documents that cannot be fed directly into the ScanSnap
Paper weight Up to 127 g/m² (up to 34 lb)
Up to 63.5 g/m² (17 lb) (when scanning documents folded in half)
Paper size
Carrier Sheet size (216 × 297 mm)
A3 (297 × 420 mm) (*2)
A4 (210 × 297 mm)
A5 (148 × 210 mm)
A6 (105 × 148 mm)
B4 (257 × 364mm) (*2)
B5 (JIS) (182 × 257 mm)
B6 (JIS) (128 × 182 mm)
Post card (100 × 148 mm)
Business card (90 × 55 mm, 55 × 90 mm)
Letter (8.5 × 11 in. (216 × 279.4 mm))
11 × 17 in (279.4 × 431.8 mm) (*2)
Custom size
Width : 25.4 to 216 mm (1 to 8.5 in.)
Length: 25.4 to 297 mm (1 to 11.69 in.)
zDo not stain, or cut the end with a black & white pattern because the Carrier Sheet will not be
recognized properly.
zDo not place the Carrier Sheet upside down. Otherwise, a paper jam may occur and damage
the Carrier Sheet and the document inside.
zDo not leave your document inside the Carrier Sheet for a long time. Otherwise, the ink on
the document may be transferred onto the Carrier Sheet.
zTo avoid deformation, do not use or leave the Carrier Sheet in high temperature places such
as under direct sunlight or near a heating apparatus for a long time.
zDo not fold or pull the Carrier Sheet.
zTo avoid deformation, store the Carrier Sheet on a flat surface without any weight on it.
zPaper jams may occur when several small size documents such as photographs and
postcards are placed inside the Carrier Sheet to be scanned at once. It is recommended that
you scan such documents one at a time.