Cleaning the Outside of the ScanSnap
360
Cleaning the Outside of the ScanSnap
Clean the outside of the ScanSnap in the following procedure.
How to perform cleaning
1. Unplug the USB cable from the ScanSnap.
2. Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened
with Cleaner F1/mild detergent.
zNever use paint thinner or any other organic solvents.
zBe careful not to get any moisture or water inside the scanner during cleaning.
zIt may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the
cloth with moderate quantity. Wipe off the cleaner completely to leave no residue on the
cleaned parts.
Mild detergent or
Cleaner F1
Cloth
Thinner