Cleaning the Inside of the ScanSnap
363
4. Connect the USB cable to the ScanSnap and the computer, then press
the [Scan/Stop] button for three seconds with the top cover open.
5. Clean the feed roller and the eject roller with a cloth moistened with
Cleaner F1.
zFeed roller (× 1)
Press the [Scan/Stop] button to rotate the roller. Gently wipe the dirt off while taking
care not to damage the surface of the roller. Make sure that it is cleaned properly
because residue on the roller will affect the feeding performance.
The USB cable should be connected to the computer only for cleaning the feed roller
and the eject roller.
zDo not use water or mild detergent to clean the inside of the ScanSnap.
zIt may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten
the cloth with moderate quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
Eject roller ( × 1)
Feed roller ( × 1)