Configuring ScanSnap Manager (for Mac OS users)
242

How to Configure Scan Settings

You can configure scan settings in the ScanSnap setup window depending on your intended
use.
Configure the scan settings in the following procedure.
1. Select [Settings] from the ScanSnap setup window.
Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 224).
The ScanSnap setup window appears.
2. Click the [Detail] button to switch to the detail view mode.
zUsing the Quick Menu
You can also open the ScanSnap setup window by pressing simultaneously the [command
( )] and [S] keys on the keyboard. This operation is only enabled when ScanSnap
Manager is active (when "ScanSnap Manager" is displayed in the menu bar).
Outline view Detail view