Fujitsu S2210 manual Drive1 Submenu of the Main Menu, Type Auto None, Multi-Sector Disabled

M a i n M e n u

Drive1 Submenu of the Main Menu

The Drive1 submenu allows you to configure secondary ATA devices.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Primary Master [None]		Item Specific Help
Type:	[Auto]	Select Serial ATA/IDE
		drive installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

		Figure 3. Drive1 Submenu
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field	Options	Default	Description
Type:	• Auto	[Auto]	NOTE: The Type field does not appear as a drop-down menu. Tap the
	• None		spacebar to toggle the selections.
			Selects the ATA/ATAPI device type. Select Auto to have the type automati-
			cally identified by the BIOS at POST. If None is selected, all of the following
			setup items do not appear.
Multi-Sector	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Transfers:	• 2 Sectors		selected and cannot be selected by the user. Specifies the number of
	• 4 Sectors		sectors per block for multiple sector transfer.
	• 8 Sectors
	• 16 Sectors
LBA Mode	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Control:	• Enabled		selected and cannot be selected by the user. Enables or disables Logical
			Block Addressing in place of Cylinder, Head, Sector addressing.

7