When the scanning is completed, Adobe Acrobat starts and displays the scanned images.

3.Set the Carrier Sheet onto the scanner.

• Place the top of the sheet

HINT

● You can also use another application to display scanned images.

● Pressing [SCAN] button, the documents are scanned in the “Duplex” mode.

To scan the document in the Simplex” mode, change this setting using the ScanSnap Manager

with the black & white printed pattern downwards, and load the document in the direction of the arrow.

• If you are using the

S.

●The ScanSnap scanner is able to scan documents using various settings. Refer to the “ScanSnap Operator’s Guide” on the “ScanSnap Setup CD-ROM” to learn more about scanning documents.

3.4.Scanning with the Carrier Sheet

If you use the Carrier Sheet, you can scan large documents such as A3/B4/11x17 size documents, and documents of irregular shapes such as clippings of newspaper.

3.4.1. Scanning documents larger than A4

Here, as an example, this section explains how to scan an A3-size document.

If you are scanning an A3 document, it is not possible to load it onto the scanner as it is. Fold the document in half and scan it following the procedure below.

1.Spread the page to be scanned facing outwards and fold it in half from the center.

Please fold it neatly so that the folded portion does not appear puffed.

2.Open the Carrier Sheet and place the folded document inside.

Align the top of the document to the top of the Carrier Sheet, and the folded portion to the top-right corner closely.

Carrier Sheet for scanning, it is not possible to scan several sheets continuously. Please load the sheets one by one and scan.

4.Press the [SCAN] button.

The front and back image data are set in a facing-page state and is output side by side.

The loading method and ScanSnap Manager’s

HINT

 

settings differ according to the documents to be

 

 

 

 

scanned. Refer to “ScanSnap Operator’s

 

 

 

 

Guide” on the “ScanSnap Setup CD-ROM” for

 

 

details.

 

 

 

3.4.2. Scanning documents of irregular size

This section explains how to scan documents that are difficult to load on the scanner.

1. Right-click the “ScanSnap Manager icon” S on the task tray and select [Settings ...] from the following menu.

The “Scan and Save Settings” window opens.

2.Select the [Paper size] tab, and click the [Carrier Sheet settings ...] button.

The “Carrier Sheet Settings” window opens.

3.On "Mode", select "Create front and back images separately" and click the [OK] button.

4.Open the Carrier Sheet and place the document inside.

Align the top of the document so that it touches the top of the Carrier Sheet. Place the document in the center, in order not to protrude out of the Carrier Sheet.

ScanSnap S500 Getting Started 11