Fujitsu S500 6.3. Replacing the Pick Roller

5.Close the ADF cover

ADF cover

You should hear the ADF cover click into position when it returns to its original position.

6.Turn on the scanner.

ScanSnap Manager icon changes from to S .

7.Right click the "ScanSnap Manager" icon S on the task tray, and select [Check consumable supplies] from the menu.

8.In the “Check consumable status” window, click the [Reset] button of Pad ASSY Count.

The counter is reset to “0”.

6.3. Replacing the Pick Roller

Replace the Pick roller following the procedure below.

1.Remove the document on the Paper chute cover.

2.Open the ADF cover while pulling the Cover open lever.

Paper chute cover

ADF cover

Cover open lever

3.Adjust the Side guide to the “A5” size.

A5

A5

4.Remove the Sheet guide.

Pinch the handle on the Sheet guide to remove it.

Sheet guide

Handle

Claw

5.Rotate the Pick roller bushing (left side) in the direction of the arrow.

Pick roller

Pick roller

bushing

Pick roller shaft

6.Remove the Pick roller with its shaft.

Slightly pull up the left part of the Pick roller shaft (about 5mm), move it towards the left side, and then raise it to remove from the scanner.

Pick roller shaft

Pick roller

ScanSnap S500 Getting Started 21

Contents

P3PC-1532-01EN Contents Introduction ScanSnap and the Manuals Regulatory Information Conventions Safety Precautions The following describes important cautions 4 | 1. Preparation 1.1.Checking the Contents of the Package 1.2. Names and Functions of Parts Front Side Buttons 2. Connecting ScanSnap 2.1. Installing the Supplied Software 2.1.1. Installing Adobe Acrobat 2.1.2. Installing ABBYY FineReader 2.1.3.Installing ScanSnap Manager, ScanSnap Organizer and CardMinder 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable 2.2.2. Connecting the USB cable 3. How to Use ScanSnap 3.1. Scanning Documents 3.2. About the Scan Settings 3.3. Scanning Office Documents 3.4.Scanning with the Carrier Sheet 3.4.1. Scanning documents larger than A4 3.4.2. Scanning documents of irregular size 3.5. Scanning Business Cards 3.6. ScanSnap Organizer 4. Troubleshooting 4.1. Troubleshooting Checklist Page 16 | 4.2. Clearing Paper Jams 5. Daily Care 5.1. Cleaning Materials 5.2. Cleaning the Scanner Exterior 5.3. Cleaning Inside of the scanner 5.4. Cleaning the Carrier Sheet 6. Consumables/Carrier Sheet 6.2. Replacing the Pad ASSY 6.3. Replacing the Pick Roller 7.Remove the Pick roller from the shaft Pull out the shaft from the Pick roller while lifting up its tab 8.Attach the new Pick roller to the shaft Insert the shaft aligning the protrusion with the slot on the new Pick roller Install the Pick roller with its shaft into the bushing 6.4. Purchasing the Carrier Sheet