Fujitsu ST4000 warranty Hdd, Access

G e t t i n g S t a r t e d

In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off.

	Icon		Mode/State	LED State	Remarks
Battery		•	On State	Green, continuous	Battery charge is between 50%-100%
		•	Idle Mode
				Amber, continuous	Battery charge is between 13%-49%
				Red, continuous	Battery charge is between 0%-12%
				Red, blinking	There is a battery error.
		•	Suspend-to-RAM,	Green, blinking slow	Battery charge is between 50%-100%.
			without AC adapter
				Amber, blinking slow	Battery charge is between 13%-49%.
		• Suspend-to-RAM
			with AC adapter	Red, blinking slow	Battery charge is between 0%-12%.
		•	Hibernate	Off	Battery is not installed, or system is off or in
			(Save-to-Disk),		Hibernate mode.
			with AC adapter
		•	Off State
		•	Hibernate		If battery is inserted during power off, LED blinks
			(Save-to-Disk),		amber for 4 seconds to detect battery. Battery
			without AC adapter		status is displayed for 5 seconds after that.
	HDD	•	On State (or	Green	Displayed when hard disk drive is accessed.
	Access		flashing)
		•	Idle Mode
		•	Suspend-to-RAM	Off	Hard disk drive is not being accessed.
		•	Hibernate
			(Save-to-Disk)
		•	Off State

Table 1-2 System Status Indicators

9