Fujitsu ST4000 warranty Sharing, Setting computer name and workgroup

Item	Description
Workgroup	A name of the network group. Use up
	to 15 single-byte characters.
	AdHoc Network: Specify the same
	name to all computers within the
	same network.
	Infrastructure Network:
	Specify workgroup name to connect
	to.

Table 10: Setting computer name and workgroup

To change the setting, click [Change], and follow the instructions on the screen. [System Properties] appears again.

5.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

Sharing

In this section, you set sharing of the drive, folder, and printer.

You need to set this only when you are sharing files or a printer with other computers on the network.

When you share a drive, folder, or printer, you can use these from any computer on the network.

Setting [File and Printer Sharing for Microsoft Networks]

1.Click [Start] -> [Control Panel]. Make sure the Classic View is selected.

2.Double-click the [Network Connection] icon.

3.Right click the [Wireless Network Connection], and then click [Properties] from the menu that appears. [Wireless Network Connection Properties] appears.

4.If [File and Printer Sharing for Microsoft Networks] is displayed in the list:

Make sure that it is checked. If it is not checked, check it, and click [OK]. You do not have to perform the following steps. Go to the next section, “Sharing Files.”

If [File and Printer Sharing for Microsoft Networks] is not found in the list, click [Install], and perform Step 5 and the subsequent steps. When you click [Install], [Select Network Component Type] appears.

5.Perform the following steps.

■Click [Service].

■Click [Add]. [Select Network Service] appears.

W i r e l e s s L A N U s e r ’ s G u i d e

6.Perform the following steps.

■Click [File and Printer Sharing for Microsoft Networks].

■Click [OK]. You will go back to [Wireless Network Connection 2 Properties], and [File and Printer Sharing for Microsoft Networks] is added to the list.

7.Click [Close].

Sharing Files

The following example shows how to set sharing the “Work” folder on the c: drive.

1.Click [Start] -> [My Computer].

2.Double-click the [Local Disk (c:)] icon.

3.Right click the “Work” folder, and then click [Sharing and Security] from the menu that appears. [Work Properties] appears.

4.Click [If you understand the security risks but want to share files without running the wizard, click here].

P O I N T

If you have already clicked [If you understand the security risks but want to share files without running the wizard, click here], this window does not appear.

In the [Work Properties] window, the description under [Network Sharing and security] changes.

5.Check [Share this folder on the network].

Uncheck [Allow network users to change my files], if the shared folder is for read only.

6.Click [OK]. The folder is set shared, and the “Work” folder icon changes.

Printer Sharing

1.Press [Start]->[Control Panel] (or [Settings], if viewing in Classic mode)-> [Printers and Faxes]. The Printers and Faxes display will appear and the connected printers will be displayed.

2.Right-click the printer to be shared, and click [Sharing] from the menu that appears. The proper- ties of the printer to be shared will be displayed. Set printer sharing.

On the display, the printer sharing setting is recom- mended by the Network Setup Wizard, but for the wire- less LAN network, security is maintained by network name (SSID) or network key. The following steps allow you to set up printer sharing without using the Network Setup Wizard.

3.Click 'If you understand the security risks but want to share printers without running the wizard, click here. 'Enable Printer Sharing' will be displayed.

4.Select 'Just enable printer sharing'.

5.Click 'OK'. The printer properties will be indicated.

53