Fujitsu Siemens Computers 4612 FA manual Switching the monitor on/off

	Color monitor 4612 FA
i	You must use corresponding software (pivot software) so that the screen display is also
	shown in the portrait mode. This software is available from specialized dealers.

To reset the monitor to the landscape mode, the monitor must be turned counter-clockwise. With the RESET button (with the OSD menu switched off) you can switch over the OSD menu again.

Switching the monitor on/off

3 2 1

1 = ON/OFF switch

2 = Power indicator

3 = Buttons for the OSD menu (On-Screen-Display)

The ON/OFF switch (1) is used for switching the monitor on and off.

The power indicator (2) glows green when the monitor and computer are switched on. The power indicator glows amber when the monitor does not receive a video signal or is in the energy-saving mode. The power indicator goes off when the monitor is switched off.

When you switch on the computer system, you must proceed in the following order:

ÊFirst switch the LCD monitor on with the ON/OFF switch (1).

ÊThen switch on the computer.

i	If your computer has a power management function (energy-saving mode), you should
	read the "Notes on power management" of the monitor in this chapter.

A26361-K628-Z100-1-5E19 English - 11