Fujitsu Siemens Computers 4612 FA manual Connecting cables to the monitor

Color monitor 4612 FA

Connecting cables to the monitor

The monitor ports are protected by a cover.

			2
		1	3
			4
1 =	Cover lever	3 =	DVI connector
2 =	D-SUB connector	4 =	Power connector

ÊPress the cover lever (1) to the left and remove the cover.

The data cables provided have a plug for the DVI connection socket on the monitor and a 15-pin D- SUB plug or a DVI plug for the connection on the computer.

ÊSelect the suitable data cable for your computer.

Digital graphics card with DVI interface:	DVI connector
Graphics card with VGA interface:	D-SUB connector

Information on the computer connections and interfaces is contained in the operating manual for your computer.

ÊConnect the DVI connector of the data cable to the DVI connector on the monitor (3) and secure the plug-in connection by tightening the safety screws.

If instead of the data cables supplied you want to use a data cable with two 15-pin D-SUB i connectors or if you want to connect the monitor to a second computer, proceed as

follows:

ÊConnect the D-SUB connector of the data cable to the appropriate D-SUB connector

(2) and secure the plug-in connection by tightening the safety screws.

Data cables with two 15-pin D-SUB connectors are available from specialized dealers.

After you have switched on the monitor you must select the desired input using the DVI/D- SUB button. A message to this effect appears on screen.

ÊConnect the connector of the power cable to the power connector (4) of the monitor and ensure a secure connection.

ÊMount the cover over the connections again.

A26361-K628-Z100-1-5E19 English - 9