Fujitsu Siemens Computers 4612 FA manual No display power indicator lights, Screen becomes darker

Color monitor 4612 FA

No display (power indicator lights)

ÊCheck whether the computer is switched on.

ÊCheck whether the data cable for the monitor is correctly attached to the monitor and the monitor port on the computer.

ÊPress any key on the computer keyboard – the computer may be in energy saving mode.

ÊAlter the brightness and/or contrast until you get a picture.

Picture disturbances (vertical and horizontal lines, picture noise)

ÊFirst adjust the function Image Adjust - H.Size in the OSD menu to eliminate vertical bars.

ÊThen adjust the function Image Adjust - Fine in the OSD menu to eliminate picture noise or horizontal lines.

If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT i or OS/2 (with Windows emulation installed) is used, the monitor can be adjusted with the

floppy disk supplied.

Permanently unlit or lit pixels

Pixel faults in the form of permanently lit or unlit pixels can occur with TFT displays. Up to 10 permanently lit and/or 10 unlit pixels does not constitute grounds for exchanging the unit. Please contact our Help Desk if the number of pixel faults exceeds the above number.

The screen becomes darker

The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be exchanged. Please contact our Help Desk.

Image of last screen display still visible

If you switch from a high-contrast display (for example black lines/characters on a white background) to a picture of medium brightness, you may be able to see a faint image of the previous display for a time. This phenomenon is not due to a monitor defect but to the technology used (IPS display with large viewing angle, IPS = In Plane Switching).

A26361-K628-Z100-1-5E19 English - 23