Fujitsu Siemens Computers 4612 FA manual VESA-DDC-compatible VGA interface, Preset operating modes

Color monitor 4612 FA

Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:	15 °C .... 35 °C
Humidity:	20 % .... 85 %
Limit range of operation:	5 °C .... 35 °C
Humidity:	20 % .... 85 %
Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 4612 FA is not yet displayed in the list of monitors, you can select the
	following monitor instead:
	Siemens MCF 4611 TA

Preset operating modes

The display position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

The following are the most frequently used of the preset operating modes:

Horizontal frequency	Refresh rate	Screen resolution
31,5 kHz	70 Hz	720 x 400
31,5 kHz	60 Hz	640 x 480
37,5 kHz	75 Hz	640 x 480
37,9 kHz	60 Hz	800 x 600
46,9 kHz	75 Hz	800 x 600
48,4 kHz	60 Hz	1024 x 768
60,0 kHz	75 Hz	1024 x 768
64,0 kHz	60 Hz	1280 x 1024
80,0 kHz	75 Hz	1280 x 1024

For ergonomic reasons, a screen resolution of 1024 x 1280 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz.

20 - English A26361-K628-Z100-1-5E19