Toshiba D-VR3SG Clearing a Preset Station, Presetting the Stations, Select Manual Setup

buttons to start scanning the

8	If you wish to cancel the auto scanning before the	4	Select “Manual Setup”
	end, press the OK button.		Move the selection bar to “Manual Setup”, using
	• The time and date are set automatically from		the		buttons then press or OK button to
	the broadcast signal. If the signal is weak or
			select.
	ghosting occurs, the time and date may not be
	set automatically.
	• Once the auto scanning procedure has finished,
	some stations may have been stored more than		P	rogramme
	once; select the stations with the best reception
	and delete the ones no longer required.					TV System	: G
							36

9	To change the programme’s name, press the
	button. The first letter of the name flashes.
		Manual Setup
		PR		01
		CH		2
		Name			A - - -
		Decoder			Off
		MFT	- - -			- - -
					Done

Clearing a Preset

Station

If you have stored a TV station:

•That you do not require

•At the wrong programme positiom you can cancel it.

Presetting the Stations	5	Press the buttons to select a PR number
		as required then press or OK button to select.

Setup	Manually	Edit
ystemS		Decoder
		Delete
		Swap
	If you have already set then automatically, you do not
	need to preset the stations manually.

10
	To...		Then....
		Select a Character	Press the	button until
			the required name character
			is displayed (letters, numbers
			or “ - ” character)
	Move to the next or		Press the	buttons
	previous character		respectively.

1	Open “MENU”
	With the DVD in Stop mode, press the MENU
	button.
2	Select “Setup”
	Using the	buttons, move the selection bar
	to “Setup” then press		or OK button to select.
3	Select “Install”
	Using the	buttons, move the selection bar
	to “Install”, then press		or OK button to select.

System Setup

1	Open “MENU”
	With the DVD in Stop mode, press the MENU
	button.
2	Select “Setup”
	Using the	buttons, move the selection bar
	to “Setup” then press		or OK button to select.
3	Select “Install”
	Using the	buttons, move the selection bar
	to “Install”, then press		or OK button to select.

Programme

6	Press the				button to select Edit.
	Then press				or OK button to be displayed
	“Manual Setup” menu.
		Manual Setup
		PR		01
		CH		- - -
		Name		- - - -
		Decoder		Off
		MFT	- - -		- - -

Done

Press the

7 channels.

The frequency band is scanned and the first sta- tion found is displayed.

Press the buttons until the NAME is select-

8 ed. The station name is set automatically from the broadcast signal.

11	If you..	Then....
	Wish to store the	• Press the	buttons until
	station displayed	the MFT is selected.
		• Press the	buttons to
		adjust the picture, if neces-
		sary.
		• Select Done to store the station.
	Do not wish to store • Press the		buttons until
	the station displayed	the CH is selected.
		• Press the	buttons to
		go on scanning the frequen-
		cy band and display the
		next station.

•Go back to the beginning of step.

12	Press the	buttons to select Done and then
	press OK button to confirm manual setting.

• Repeat this procedure from step 5 onwards, until all the required stations have been stored.

Programme

4	Select “Manual Setup”
	Using the	buttons, move the selection bar

to “Manual Setup” then press or OK button to select.

		TV System	: G
P	rogramme		: Ch 36

30 - English English - 31