Toshiba D-VR3SG owner manual Setting the Date Time, Presetting the Stations Automatically

System Setup

Setting the Date

and Time

Your DVD Recorder-VCR contains a 24-hour clock and calendar used to:

•Automatically stop programme recording

•Preset your DVD Recorder-VCR to record a pro- gramme automatically You must set the date and time

•You must set the date and time when you purchase the DVD Recorder-VCR

•Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

With the unit in Stop mode, press the MENU

1 button.

Programme

Programme ShowView

ShowView Extended : Off

4	Press	to select the hour, minutes, day,
	month and year.
5	Press the	button to increase or decrease the
	value.
	• The day of the week is displayed automatically.
	• You can hold the		buttons down to scroll
	more quickly through the values.

Programme

/

Press OK button, then the date and time will be

6 saved, if you don’t press OK button, it will not be saved.

7 On completion, press RETURN to exit the menu.

„ You must have the aerial connected to set the

Presetting the Stations Automatically

You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 27).

Your DVD Recorder-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

•Plug & Auto Set up (see page 27)

•Automatically

•Manually (see page 30)

1	Open “MENU”
	With the DVD in Stop press the MENU button.
2	Select “Setup”
	Using the	buttons, move the selection bar to
	“Setup” then press		or OK to select.
3	Select “Install”
	Using the	buttons, move the selection bar
	to “Install”, then press		or OK to select.

5	Select “Country ” using the								buttons to
	select your country.
							Auto Setup
					Country Selection
								Others
				MOVE		OK		EXIT
	Press OK button.
6
	A message appears, indicating that any channels
	already preset on the DVD Recorder-VCR will be
	deleted.
		P	rogramme
					Press [OK] to continue
						[Menu] to exit

7	Press OK to start the auto
	scaning.

System Setup

2	Using the	buttons, move the selection bar
	to “Setup” then press OK to select.
3	Select “Clock Set” using the		buttons, then
	press the	or OK button.

Programme

Note

Auto Clock. Connecting the RF Cable On page 18.

Programme

4	Select “Auto Setup”
	Move the selection	buttons to “Auto Setup”
	then press or OK	button to select from the
	following options:

• The first frequency band is scanned and the first station found is displayed and stored. And the DVD Recorder-VCR searches for the second station and so on.

• When the automatic scanning procedure has finished, the DVD Recorder-VCR switches automatically to programme 1.

• The number of stations automatically stored by the DVD Recorder-VCR depends on the num- ber of stations that it has found.

Programme

Programme

TV System : G

36

28 - English English - 29