Reference

Reference

Troubleshooting (DVD-VIDEO/DVD-

RAM/DVD-RW/DVD-R)

107

Troubleshooting

108

Problems and Solutions (VCR)

109

Specifications

110

106- English

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

Troubleshooting

Problems and Solutions (VCR)

Specifications

LIMITED WARRANTY TO ORIGINAL PURCHASER

Troubleshooting

(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

If your product malfunctions, go through the check points below before contacting a Toshiba authorized service center,

No power.

Check whether the power cord is securely plugged into the power outlet.

 

Did you press the ON/STANDBY button of your DVD Recorder-VCR.

 

 

The input is displayed

The DVD Recorder-VCR requires some time to initialize after it is turned on.

for a while when the

 

power turns on.

 

 

 

Check whether the power cord is securely plugged into the power outlet.

Cannot record TV Did you set the DVD Recorder-VCR channel settings correctly?

programs.Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.

Check the antenna cable is connected.

Timer recording

Check the recording time, end time and current time settings again.

does not work

Recording will be cancelled, if the power is removed due to a power

properly.

failure or other reason during recording.

 

 

 

Check whether the disc is formatted. This product can record on

Cannot record.

formatted discs only. (See page 102.)

Is the DVD-RAM cartridge protected?

 

Set the write protect tab to the unprotect position.

 

Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space.

 

 

I pressed the REC

Recording is available on DVD-RAM/DVD-RW/DVD-R discs only.

button but there is

If a program is copy protected, you cannot record it.

no response.

 

 

 

 

 

 

 

I forget the pass

Press the

and

button of your DVD Recorder-VCR at the same time when the

 

 

 

word for parental

power is on. All settings including password will revert to factory settings. Do not use it

if not absolutely required.

care.

(Note that this function is available only when there is no disc inserted.)

 

 

 

Cannot playback

Check whether the disc is inserted correctly with the label facing up.

Check the regional code of your DVD disc.

the disc.

This DVD Recorder-VCR cannot playback some types of disc. (See page 7.)

 

Are you watching a program in slow or skip mode?

No sound.If you are playing a program at a speed other than normal speed, sound is not output.

Check the connections and initial settings.

Check whether the disc is damaged. Clean up the disc, if necessary.

Check whether the disc is inserted correctly with the label facing up.

English - 107

Reference

Page 54
Image 54
Toshiba D-VR3SG owner manual Troubleshooting, Reference