Toshiba D-VR3SG owner manual Set Front Display, Press or , until

Front Display	4	Set “Front Display”
		Move the selection bar to “Front Display,” then
		press or OK button to select from the follow-
		ing options:
		• Automatic	– Front Panel Display will dim
			auto- matically during power off.
		• Bright	– Front Panel Display will be bright
			all the time.
		• Dim	– Front Panel Display will be dim
You can set the Front Panel Display to be bright all the			all the time.
time, dim all the time, dim during power off.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmis- sion in another language).

NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.

5	To...	Press or , until...
	Mono mode	Off is displayed.
		Off: Only set at this position to
		record the standard mono
		sound during a NICAM broad-
		cast if the stereo sound is dis-
		torted due to inferior reception
		conditions.
	NICAM mode	On is displayed.
		On: Normally set at this position.

System Setup

1	Open “ MENU”
	With the DVD in Stop mode, press the MENU
	button.
2	Select “Setup”
	Using the	buttons, move the selection bar
	to “Setup” then press		or OK button to select.
3	Select “System ”
	Using the	buttons, move the selection bar
	to “System ” then press		or OK button to
	select.

NICAM

Programme AV1 Output

1	Open “MENU”
	With the VCR in play mode, Press the MENU
	button.
2	Select “Setup”
	Using the	buttons, move the selection bar
	to “Setup” then press		or OK button to select.
3	Select “System”
	Using the	buttons, move the selection bar
	to “System” then press		or OK button to select.

Programme

6	On completion, press RETURN three times to
	exit the menu.
							System
AV 1 Output
							Setup
					Front Display	: Automatic
					NICAM	: On
		P	rogramme	AV1 Output		Video
						RGB

Programme

						• RGB : Sends RGB signal from the AV JACK
						(SCART terminal)
4	Select “NICAM”					• Video : Sends COMPOSITE VIDEO signal from
	Using the			buttons, move the selection bar		the AV JACK (SCART terminal).
	to “NICAM” then press				or OK button until
	NICAM option is selected.
				VCR
				Front Display	: Automatic
				NICAM	OFF
		P	rogramme	AV1 Output	On

46 - English English - 47