Toshiba D-VR3SG owner manual Intelligent Picture Control IPC, Selection the Colour Mode, Setup

Intelligent Picture

Control (IPC)

The intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, accord- ing to your own preferences.

	1	Open “MENU”
		With the VCR in play mode, Press the MENU
		button.
Setup	2	Select “Setup”
		Using the	buttons, move the selection bar
System		to “Setup” then press		or OK button to select.
	3	Select “System”
		Using the	buttons, move the selection bar
		to “System” then press		or OK button to select.

Programme

5 Select “IPC”

Using the buttons, move the selection bar

to “IPC” then press or OK button to select the IPC option.

•When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically.

	Off
Programme	Off
	On

6	To adjust the sharpness manually, press the
	button to turn the IPC mode OFF.
7	Press the	buttons until the picture is dis-

played according to your preferences.

•If you do not press a button within ten seconds, the IPC menu disappears automatically.

On completion, press RETURN button to exit the

8 menu.

„ You also can directly select this function using

Selection the Colour Mode

Before recording or playing back a tape, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select Automatic.

• When playing back a tape, the standard is automatical- ly selected by the DVD Recorder-VCR.

1	Open “MENU”
	With the VCR in play mode, Press the MENU
	button.
2	Select “Setup”
	Using the	buttons, move the selection bar
	to “Setup” then press		or OK button to select.
3	Select “System”
	Using the	buttons, move the selection bar
	to “System” then press		or OK button to select.

Programme

4 Select “VCR”

Move the selection bar to “VCR”, then press or OK button.

VCR
Front Display	: Automatic
NICAM	: On

P rogramme AV1 Output : RGB

5	Select “Colour System”
	Using the	buttons, move the selection bar

to “Colour System” then press	or OK button to
select Colour System option.
Automatic -> PAL -> B/W.

•Automatic : When playing back a tape, the sys- tem standard is automatically selected by the DVD Recorder- VCR.

•B/W : Black and White.

Programme

System Setup

4	Select “VCR”
	Move the selection bar to “VCR”, then press
	or OK button.
					VCR
					Front Display	: Automatic
					NICAM	: On
		P	rogramme	AV1 Output		: RGB

Note

IPC button on the remote control.

6	On completion, press RETURN three times to
	exit the menu.

44 - English English - 45