12 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • February 2008
RTIF1-
070904-006
While executing the domain power-on,
domain reset or DR, in case the XSCF reboot
occurred, the process may be aborted in some
or all of the XSB.
Execute the domain reset one more time, or
power off the domain and then power on
again.
RTIF1-
070914-006
When you set the XSCF user account name to
the maximum 32 characters, you can log in,
but then, when you execute the XSCF Shell or
operate the XSCF Web, "Permission denied"
occurs.
Use up to 31 characters to set the XSCF user
account name.
RTIF1-
070914-019
The CLI 'showldap -c' (which displays
current LDAP certificates) will show proper
data only when used with the same user
account that had originally provided certificate
information using 'setldap -c'. Any other
user account will generate "Permission denied"
error. Similarly, the XSCF Web’s LDAP
Configuration pop-up screen will display no
data, when a different user account is used.
Use the same user account for all LDAP
display or configuration operations, for both
CLI and XSCF Web.
RTIF1-
070914-020
On the User Account setting page on the User
Manager screen, after the password change
resulted in "Change P assword Error," when
you click on the REFRESH button, there
appears the error message "No user. The
request is aborted."
To change the password, select User Manager
on the Menu again.
RTIF1-
070914-021
During the Open BootPROM process, when
you power off the domain, the error log of
Domain hang-up detected (level3) may be
registered.
This error log can be safely ignored.
RTIF1-
070914-023
When you specify the domain ID or XSB
number which are not supported on the
machine, there appears the parameter error
message.
To specify the available domain ID or XSB
number on the machine.
RTIF1-
070914-025
When you execute XCP Sync on the Firmware
Update page, after 15 minutes, the error
message "Another flashupdate is now
processing" or "The page cannot be displayed"
may appear.
None available at this time. However, the XCP
Sync process has been continuously executed.
Check the XSCF update completion message
on the monitoring message to confirm the
completion of Sync process.
RTIF1-
071102-001
The XSCF firmware monitors itself and if it
detects any inconsistencies, it forces an XSCF
reboot.
There is no workaround. Allow the XSCF Unit
to finish rebooting. It returns to normal
operation within approximately 5 minutes.
RTIF1-
071102-002
The snmp daemon might quit. To restart the snmp daemon, issue the
command setsnmp enable.
TABLE3 XCP Issues and Workarounds (Continued)
ID Description Workaround