32 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • February 2008
Software Documentation Updates
This section contains late-breaking software information that became known after
the documentation set was published and corrections in the SPARC Enterprise
M8000/M9000 servers software documentation.
The corrections for SPARC Enterprise M4000/M5000/M8000/M9000 servers XSCF
Reference Manual, if not otherwise specified, also apply to the man pages which
XSCF provides. And they supersede the information on the man pages.
TABLE5 lists known documentation updates.
TABLE5 Documentation Updates
Title Page Number Update
All SPARC Enterprise
M8000/M9000 servers
documentation
All DVD references are now referred to as CD-RW/DVD-RW.
SPARC Enterprise
M4000/M5000/M8000/
M9000 Servers XSCF
Reference Manual
setpowerupde
lay(8) man
page
The following description is added in EXTENDED
DESCRIPTION:
When the power is turned on from the operator panel, the wait
time and warm-up time that you set are ignored. If you have
set these times and wish to observe them at startup, perform the
poweron(8) command.
setupplatfor
m(8) man page
The -p user option requires useradm privileges.
The -p network option requires platadm privileges.
The -p altitude option requires platadm privileges.
The -p timezone option requires platadm privileges.