
falcon.book Page 91 Friday, August 4, 2006 11:12 AM
8.Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the “work” folder will change.
Setting the printer-sharing function
1.Click [Start]
2.
Setting the
3.Click the [Sharing] tab.
4.Click [Share this printer].
5.Enter the sharing printer name in [Share name].
6.Click the [OK] button.
Confirming connection
After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure.
In the case of access point (infrastructure) connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure.
Connecting your personal computer to another personal computer
1.Click [Start] first and then [My Computer]. The [My Computer] window will be displayed in the left frame.
2.Click [My Network Places] in the “Other Places” list. The window [My Network Places] will be dis- played.
3.Click [View workgroup computers] under Network Tasks in the left frame.
4.
W i r e l e s s L A N U s e r ’ s G u i d e
that was specified in “Setting the
5.
Confirming the status of the radio
1.
2.Click [Open Atheros Client Utility]. The Atheros Client Utility window opens.
3.Contained within the Current Status and Profile Management tabs, you will find the current operat- ing status of the radio. (When the radio is turned off or the computer is not yet connected, some of the conditions will not be displayed.)
Among the information displayed are the follow- ing:
■Network Name (SSID)
Displays the Network Name (SSID) currently used by the radio.
■Profile Name
The current configuration profile is displayed.
■Mode
Displays the current operating mode. [Infra- structure (AP)] or [Ad Hoc] will be displayed.
■Data Encryption
Displays the current security status of the profile being used:
None: No encryption used.
WEP: WEP encryption algorithm used.
CKIP: WEP encryption algorithm used.
TKIP: WEP encryption algorithm used.
■Signal Strength
Displays the current strength of the signal being received by the radio.
■Current Channel
Displays the current transmit and receive channel being used.
■Radio Status
Displays the current status of the radio.
91