![](/images/new-backgrounds/1157564/15756429x1.webp)
CHANNEL LIST
This function lets you remove undesired channels from the Channel Registration List.
| STILL |
- | 0 |
SETUP | SCREEN |
MODE | |
| ENTER |
BACK | INFO |
CH RETURN
1Display the setup screen.
•Press [SETUP].
The following setup screen appears.
2Select “CHANNEL” and press [ENTER] to con- firm.
• Using [K/L], select “Channel List”.
Channell
Autoscan
Channel List
Manual Register
Antenna
•Press [ENTER].
3Select the channel you want to remove.
• Using [K/L], select the channel.
Channell Listi
Highlight channels for |
| DTV | 6 | |
Ch Up/Down key selection. | DTV | 8 | ||
|
|
| ||
|
|
|
| 9 |
|
|
|
| 27 |
|
|
| DTV | 48 |
|
|
|
| 58 |
|
|
| DTV | 67 |
Ch Select |
| Watch/Skip | BACK |
|
ENTER | Back |
|
•Press [ENTER] to highlight the channel select- ed for removal. You will not be able to select the channel again using [CH K/L].
•To reactivate the removed channel, highlight it and press [ENTER].
•When you remove a major channel, you remove its minor channels, too.
NOTE:
•The channel with “DTV” indicated on the display is ATSC, otherwise the channel is NTSC.
4To exit the setup, press [SETUP].
MANUAL REGISTER
This function lets you manually add channels not memorized due to poor broadcast strength during
AUTOSCAN.
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
7 | 8 | 9 | AUDIO |
|
|
| |||
|
|
| STILL |
|
- | 0 |
|
|
|
SETUP |
|
| SCREEN |
|
|
| MODE | SETTINGS | |
|
| ENTER |
| |
BACK |
|
| INFO |
|
1 Display the setup screen. |
| CHANNEL | ||
• Press [SETUP]. |
|
|
| |
|
|
|
|
The following setup screen appears.
2Select “CHANNEL” and press [ENTER] to con- firm.
• Using [K/L], select “Manual Register”.
Channell
Autoscan
Channel List
Manual Register
Antenna
•Press [ENTER].
3Select the channel you want to add.
•Using [the Number buttons], select your desired channel.
|
|
|
|
| 11 |
|
|
|
|
|
|
|
|
| Manuall Registeri |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| For Analog channels, | Register | |
|
|
| select a channel to register |
| |
|
|
| using number keys. |
| |
|
|
| For Digital channels, |
| |
|
|
| you must perform Autoscan function. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BACK | Back |
|
|
| Ch Change | ||
|
|
| |||
|
|
|
|
|
|
• Select “Register” with [ENTER].
4To exit the setup, press [SETUP].
NOTES:
•If set up completes successfully, “Registered to the Channel List” is displayed.
•If Video 1 is being used, set up will not be completed suc- cessfully and “Unavailable” will be displayed on the screen.
15
EN