ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
#CAUTION
•Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the manufacturer’s warranty.
•This TV is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts may result in instability causing possible injury.
2
Rear of this TV
1 
1
Stands
(SOLD SEPARATELY)
1Turn the TV over and place it
NOTES:
•Make sure to use a table which can support the weight of the TV and is larger than the TV.
•Make sure the table is in a stable location.
2Remove the stands from the TV.
Unscrew the M5 screws indicated by 1 , and remove the left and right stands.
NOTE:
•The screws and stands you have removed are neces- sary for reattachment at a later date. Make sure to keep them in a safe place.
3Attach the left and right TV rails to the TV using the M8 screws included with the wall mount kit. 2 indicates the position of the screw holes on the TV.
NOTES:
•Only use the screw holes indicated by 2 for mount- ing the TV.
•For instructions on how to attach the TV rails, refer to the instruction manual included with the mount wall kit.
4Attach the TV to the wall.
NOTE:
•Refer to the instruction manual included with the mount wall when securing the TV to the wall.
*If you want to attach the stands of this TV again, insert the stand slowly as illustrated below and drive screws in the 4 threaded holes ( 1 ).
OPTIONAL SETTINGS / ATTACHING A WALL MOUNT BRACKET
1
31
EN
