FUNAI CR202TT9 owner manual Chip, Dpage

5V-chip

V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children.

1Press [MENU] to display the main menu.

MENU

2Use [CH K/ L] to select “V-CHIP SETUP“, then press [VOL X].

e.g.) digital TV mode

CH	-	TV SETUP -
or	PICTURE
CH	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	DTV SETUP

VOL

3 Use [the Number buttons] to enter the 4-digit numbers for your password.

1 2 3

PASSWORD

4 5 6

- - - -

7 8 9

0

•When you have not set up your password, enter 0000.

•When the password is correct, the following “V-CHIP SETUP” menu is displayed.

See the following description for setting each item.

e.g.) digital TV mode

A...“A. TV Rating” Dpage 20	- V - CHIP SETUP -
B...“B. MPAA Rating”Dpage 21	TV RATING	A
	MPAA RATING	B
C...“C. Change Password”	DOWNLOADABLE RATING
	CHANGE PASSWORD	C
Dpage 21

Note:

•“DOWNLOADABLE RATING“ will be available when the unit receives a digital broadcast using the new rating system.

•When you select a rating and set it to “BLOCK”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

•When you set the highest rating to “VIEW”, all ratings turn to “VIEW” automatically.

•If the “PROTECTED PROGRAM” message appears during your TV viewing, change to a channel that is not blocked. Then, you can access “V-CHIP SETUP” menu and change the setting to allow all TV viewing.

•To block any inappropriate programming, set your limits in both “TV RATING” and “MPAA RATING”.

•The V-chip setting will be retained after a power failure (except the access code reverts to 0000).

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

19

EN