FUNAI CR270TT8 owner manual 5Auto Channel Scan, 5Language Selection

• ENG/ESP/FRA

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 11.)

•V-CHIP SET UP

You can set the viewing limitations. (Refer to “V-chip” on page 20.)

•CAPTION

You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.

(Refer to “Closed Caption” on page 17.)

• DTV SET UP

You can set the screen display or caption in the DTV mode.

(Refer to “DTV Closed Caption” on page 18.)

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you recover the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cable.

1Press [MENU] to display the main menu.

MENU

2Use [CH K/L] to select “CHANNEL SET”, then press [VOL X].

e.g.) digital TV mode

CH	PICTURE
or
	CHANNEL SET
CH	[ENG]/ESP/FRA
	V-CHIP SET UP
	CAPTION [OFF]
	DTV SET UP

VOL

3Use [CH K/L] to select your desired preset type, then press [VOL X].

e.g.) digital TV mode

CH

or

CH	ADD/DELETE(DTV)
	AUTO PRESET CH(DTV)
	AUTO PRESET CH(TV/DTV)
	AUTO PRESET CH(CATV)
	! CATV takes approx. 50min.

VOL

	• When aerial antenna is connected, select “AUTO		INTRODUCTION
	PRESET CH (TV)”, “AUTO PRESET CH (DTV)” or “AUTO
	PRESET CH (TV/DTV)”.
	• When connected to CATV, select “AUTO PRESET CH
	(CATV)”.		CONNECTION
	• Auto scanning begins.
		e.g.) digital TV mode
		AUTO PRESET CH(DTV)
			INITIAL
	• When the scanning and memorizing are completed,
			SETTING
	lowest memorized analog channel will be displayed
	the lowest memorized channel will be displayed.
	• When you selected “AUTO PRESET CH (TV/DTV)”, the
	when the scanning and memorizing are completed.
	If there is no analog channel, the lowest memorized		WATCHING
	digital channel will be displayed.
	Note:
	• If you connect the cable system directly, contact the CATV
	installer.		TV
	• If you press [POWER] or [MENU] during “AUTO PRESET CH”,
	the setting will be canceled.
	• When no channel can be received by “AUTO PRESET CH”, “NO
	TV SIGNALS” is displayed on the TV screen.		OPTIONAL
	• Channel setting will be saved even if the power fails.
	• With regard only to the digital channel, even after the
	scanning is complete if you unplug the AC power cord before		SETTING
	turning off the unit by pressing [POWER], the channel setting
	may be lost.
5Language Selection
			TROUBLESHOOTING
	MENU
You can choose English, Spanish, or French as your on-screen language.
1 Press [MENU] to display the main menu.
2 Use [CH K/L] to select “[ENG]/ESP/FRA”,			INFORMATION
		CHANNEL SET
	then press [VOL X] repeatedly to change the setting.
		e.g.) digital TV mode
	CH	PICTURE
	or	[ENG]/ESP/FRA
	CH
		V-CHIP SET UP
		CAPTION [OFF]
		DTV SET UP

VOL

[ENGLISH]

[ESPAÑOL]

[FRANÇAIS]

3Press [MENU] to exit.

MENU

11

EN