FUNAI CR270TT8 owner manual Optional Setting, 5Channel Add/Delete, Press Menu to exit

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not	6 Press [MENU] to exit.
added by the auto channel scan due to the reception status at the initial
setting. You can also delete the unnecessary channels.
	MENU

1Press [MENU] to display the main menu.

MENU

2Use [CH K/L] to select “CHANNEL SET”, then press [VOL X].

e.g.) digital TV mode

CH	PICTURE
or	CHANNEL SET
	[ENG]/ESP/FRA
CH
	V-CHIP SET UP
	CAPTION [OFF]
	DTV SET UP

Note:

•The main menu will disappear automatically in about 10 seconds.

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 11.)

VOL

3Use [CH K/L] to select “ADD/DELETE(DTV)” or “ADD/ DELETE”, then press [VOL X].

e.g.) digital TV mode

CH

or

CH

ADD/DELETE(DTV)

AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV)

! CATV takes approx. 50min.

VOL

4Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 12.)

e.g.) digital TV mode

D12

ADD/DELETE:DTV

5Use [VOL X/Y] to select “ADD” or “DELETE”.

• To add or delete another channels, repeat steps 4-5.

VOL or VOL

•Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

16

EN