FUNAI MWR10D6 owner manual Initial setting, Channel setting, Getting channels automatically

Turn on this unit for the first time, you need to follow these steps.

1

Press [STANDBY-ON ].

2

Turn the TV on. Select the input to which the unit is connected.

Refer to the table on page 13.

TV's original

remote control

TV / VIDEO

*This button can be labeled as INPUT, AUX, etc.

Getting started

Initial setting

3

Using [K / L], select your desired language on screen menu. Then press [OK] to set language.

“Channel Preset” will automatically appear.

Initial Setup

Channel Preset

4

Press [OK] to start Channel Preset.

The unit will start getting channels available in your area.

CH 1

Auto Presetting Now

1

3

4

“Initial Setup” will automatically appear.

Initial Setup

English

Français

Español

If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures.

Getting channels automatically

1

Press [SETUP].

18EN

After channel setting is finished, “Clock Setting” will appear. Then press [OK].

Initial Setup

Clock Setting

5

Follow to step 3 in “Manual Clock Setting” on page 22.

•If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” on page 21.

Channel setting

2

Using [K / L], select “Channel”. Press [OK].

Channel menu will appear.

3

Using [K / L], select “Auto Channel Preset”. Press [OK]. The unit will start getting channels available in your area.

4

Press [SETUP] to exit.

•You can select only the channels memorized in this unit by using [CHANNEL - /+] and the Number buttons.

2

3

1

4