FUNAI MWR10D6 Before you start Connections Getting started, Recording Playing discs Editing

Owner’s Manual

Recordable disc

•We strongly recommend for good recording quality:

TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x, MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x

•Discs that have been tested and are proven to be compatible with this recorder:

VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x

DVD Recorder

MWR10D6

Before you start Connections Getting started

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or

to order replacement accessories, please call

TOLL FREE : 1 800-605-8453

or visit our web site at http://www.funai-corp.com

Connection to a TV (Before you use this unit, you need to complete connections.)

If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.

1)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit.

2)Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.

3)Connect your RF modulator to your TV by another RF cable.

4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.

5)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the instructions supplied with the RF modulator.

Recording Playing discs Editing

Cable Antenna TV signal

1

(Back of This Unit)							4
	VIDEO IN	COMPONENT
IN		VIDEO OUTPUT			VIDEO OUT
		S-VIDEO	Y
OUT	IN	OUT					Audio/Video cables
	L				L		(supplied)
	R		PB/CB		R
	AUDIO IN		PR/CR	AUDIO OUT
	(E1)
2		5
RF cable		Set channel 3 or 4.
(supplied)
AC 120V ANT IN CHANNEL					TO TV	AUDIO IN VIDEO IN
		3		4		R	L
STEREO AUDIO/VIDEO							Antenna in jack
RF Modulator						3	RF cable
(commercially available)
							(commercially available)

6

Turn on your TV and select channel 3 or 4.

(Back of TV)

Note

•The quality of picture may become poor if this unit is connected to an RF modulator.

Changing the Setup menu Others

Español

To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed. (You CANNOT record on any copyright protected DVD disc with this unit.)