Canon IXUS980IS manual Viewing Slideshows, Changing Settings, Select Slide Show, Select Start

. Viewing Slideshows

You can automatically playback images and movies recorded to a memory card. Each image displays for approximately 3 seconds.

Select [Slide Show].

●Press the nbutton and select the 1

tab, then select [Slide Show] and press the m button.

Select [Start].

●Press the qr buttons or turn the  dial to select [Start], then press the m button.

XA few seconds after [Loading image…] displays, the slideshow will start.

●You can pause/restart a slideshow by pressing the m button again.

●Press the n button to stop the slideshow.

• If you press the qr buttons or turn the  dial during playback the image will switch, if you press and hold down the qr buttons you can fast-forward through images.

•Power saving function does not work during slideshows (p. 51).

Changing Settings

You can change the time that images are displayed, and set the slide show to repeat.

Select [Set up].

●Follow Step 2 above, select [Set up] and press the m button.

Make the setting.

●Press the opbuttons and select an item, then press the qrbuttons, or turn the  dial and make the setting.

●Pressing the n button will return you to the slide show screen.

107