Using Household Power

If you use AC Adapter Kit ACK-DC30 (sold separately), you can use the camera without worrying about how much charge is left in the battery.

Insert the coupler.

Open the cover (p. 14) and insert the coupler as shown until it locks into place with a click.

Close the cover (p. 14).

Plug the cord into the camera.

Open the cover and fully insert the plug into the coupler.

Connect the power cord.

Connect the power cord to the compact

power adapter, then plug the other end into a power outlet.

You can turn the camera on to use it.

After you finish, turn off the camera and unplug the power cord from the power outlet.

Do not unplug the power cord with the camera turned on. This could erase images you have taken or damage the camera.

Using a Supplementary Flash

High-Power Flash HF-DC1 (sold separately) is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. For details on attaching and using the High-Power Flash, refer to the user guide provided with the flash.

When can you not use the HF-DC1?

When in D mode (p. 89)

150

Page 150
Image 150
Canon IXUS980IS Using Household Power, Using a Supplementary Flash, Insert the coupler, Plug the cord into the camera