AMX MVP-5200i manual Accessories, Table Charging Station, Powering the MVP-TCS-52

Accessories

Accessories

Table Charging Station

The MVP-5200i device comes with the MVP-TCS-52 Table Charging Station (FG5966-1X) (FIG. 5), which acts both as a charging station and a direct power connection. The charging station is available in either white (FG5966-10) or black (FG5966-11).

FIG. 5 MVP-TCS-52-GB Table Charging Station - Front

MVP-TCS-52 Specifications

Dimensions (HWD):	• 8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm)
Weight:	• .65 lbs (.29 kg)
Rear Connector:	• 5-pin charging connector on bottom of charging cradle.
Operating/	• Operating Temperature: 0° C (32° F) to 40° C (104° F)
Storage	• Operating Humidity: 20% - 85% RH
Environments:
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% - 85% RH
Included	• MVP-TCS-52 Table Charging Station Quick Start Guide
Accessories	(93-5966-02)
	• PS3.0 Power Supply (FG423-44)
Other AMX	• MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss Black
Equipment:	(FG5966-01)
	• MVP-5200i Modero Viewpoint Widescreen Touch Panel - Gloss White
	(FG5966-02)
	• MVP-WCS-52: Wall Charging Station (FG5966-1X)

Powering the MVP-TCS-52

The MVP-TCS-52 uses a PS3.0 power supply (included with the MVP-5200i touch panel or available separately from www.amx.com) to provide direct power for the MVP panel both for standard functions and for charging its internal battery.

1.Connect the terminal end of the PS3.0 power supply to the PWR connector on the bottom of the MVP-TCS-52.

2.To prevent wear on the power supply cord and assure that the device’s base is in full contact with the table surface, press the cord into the locking groove running across the bottom of the device.

3.Provide power to the MVP-TCS by connecting the PS3.0 cord to an external power source.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 7