AMX MVP-5200i manual System Settings Page Elements, Protected Setup Pages, Master

Protected Setup Pages

System Settings Page

The System Settings page (FIG. 60) displays sets the NetLinx Master’s communication settings.

FIG. 60 System Settings page

The elements of this page include:

System Settings Page Elements

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Protected Setup page provides a
	constant visual indication of current connection status.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
IP Settings:	Switches the IP settings between DHCP and Static. DHCP means that the IP
	address and the subnet mask fields are greyed out; inStatic, press either of the
	fields to open the IP Address and Subnet Mask keypads.
Master Connection:	Sets the NetLinx Master communication values:
Type
	Sets the NetLinx Master to communicate with the panel via Ethernet, USB,
	Mesh, or ICSNet. This is based on the cable connection from the rear.
	• Ethernet is a CAT-5 cable (10/100Base T terminated in an RJ-45 connector)
	used to network computers together and is used in most LAN (local area
	networks). This description is also used to refer to both wired and wireless
	communication. A Wireless Ethernet connection involves indirect
	communication from the panel to a Master via a wireless connection to the
	network.
	• A USB connection is a direct connection from the panel’s mini-USB port to a
	corresponding USB port on the PC (acting as a Virtual Master).

62 MVP-5200i Modero Viewpoint Widescreen Touch Panel