AMX MVP-5200i manual WPA-PSK Settings, Press the WPA-PSK button to opens the WPA-PSK dialog FIG

Models: MVP-5200i

1 184
Download 184 pages 58.64 Kb
Page 79
Image 79
WPA-PSK Settings

Protected Setup Pages

WPA-PSK Settings

Press the WPA-PSKbutton to opens the WPA-PSKdialog (FIG. 65).

FIG. 65 Wireless Settings page - WPA-PSK Settings

WPA-PSK security is designed for environments where using WPA or WPA2 is desirable, but an 802.1x authentication server is not available. PSK connections are more secure than WEP and are simpler to configure, since they implement dynamic keys but share a key between the WAP and the panel (client).

Using WPA-PSK, the encryption on the WAP could either be WPA or WPA2. The firmware in the panel will automatically connect to the WAP using the correct encryption. The WPA encryption type is configured on the WAP, not in the firmware.

WAPs do not display “WPA” or “WPA2” on their configuration screens:

WPA is normally displayed as TKIP.

WPA2 is normally displayed as AES CCMP.

The following fields are required: SSID and Password/Pass Phrase.

Enter the SSID of the WAP.

Enter a pass phrase with a minimum of 8 characters and a maximum of 63.

The exact same pass phrase (including capitalization) must be entered in the access point.

WPA-PSK Settings

SSID (Service Set Identifier):

Opens an on-screen keyboard to enter the SSID name used on the target

 

WAP. The SSID is a unique name used by the WAP, and is assigned to all

 

panels on that network. An SSID is required by the WAP before the panel is

 

permitted to join the network.

 

• The SSID is case sensitive and must not exceed 32 characters.

 

• Make sure this setting is the same for all points in your wireless network.

 

NXA-WAP200Gs use AMX as their default SSID.

 

• If this field is left blank, the panel will attempt to connect to the first available

 

WAP.

 

 

Password/Pass Phrase:

Opens an on-screen keyboard to enter a passphrase (password).

 

• This alpha-numeric string must use a minimum of 8 characters and a

 

maximum of 63.

 

• The exact pass phrase string (including capitalization) must be entered on

 

the target WAP.

 

 

MVP-5200i Modero Viewpoint Widescreen Touch Panel

71

 

 

Page 79
Image 79
AMX MVP-5200i manual WPA-PSK Settings, Press the WPA-PSK button to opens the WPA-PSK dialog FIG