AMX MVP-5200i manual Upgrading Firmware

Upgrading Firmware

3.After the Communication Verification dialog window verifies active communication between the Virtual Master and the panel, click the OnLine Tree tab in the Workspace window (FIG. 83) to view the devices on the Virtual System. The default System value is 1.

4.Right-click on the System entry (FIG. 83) and select Refresh System to re-populate the list. Verify the panel appears in the OnLine Tree tab of the Workspace window. The default Modero panel value is 10001.

Showing the Virtual Master firmware version and device number

Shows Netlinx Studio version number

Shows the current MVP panel firmware version and device number

FIG. 83 NetLinx Workspace window (showing panel connection via a Virtual NetLinx Master)

The panel-specific firmware is shown on the right of the listed panel.

Download the latest firmware file from www.amx.com and then save the Kit file to your computer. Note that each kit file is intended for download to its corresponding panel.

5.If the panel firmware version is not the latest available; locate the latest firmware file from the www.amx.com > Tech Center > Downloadable Files > Firmware Files > Modero Panels section of the website.

6.Click on the desired Kit file link and after accepting the Licensing Agreement, verify download of the Modero Kit file to a known location.

96 MVP-5200i Modero Viewpoint Widescreen Touch Panel