AMX MVP-5200i manual Gsn, Ico, Irm

Programming

"^" Button Commands (Cont.)

^GSN	Slider names and cursor names can be found in the TPDesign4 slider name and cursor
Change the	drop-down list.
	Syntax:
bargraph slider
name or joystick	"'^GSN-<vt addr range>,<bargraph slider name>'"
cursor name.
	Variable:
	variable text address range = 1 - 4000.
	bargraph slider name = See table below.
	Bargraph Slider Names:
	None	Ball	Circle -L
	Circle -M	Circle -S	Precision
	Rectangle -L	Rectangle -M	Rectangle -S
	Windows	Windows Active
	Joystick Cursor Names:
	None	Arrow	Ball
	Circle	Crosshairs	Gunsight
	Hand	Metal	Spiral
	Target	View Finder
	Example:
	SEND_COMMAND Panel,"'^GSN-500,Ball'"
	Changes the bargraph slider name or the Joystick cursor name to ’Ball’.
^ICO	Syntax:
Set the icon to a	"'^ICO-<vt addr range>,<button states range>,<icon index>'"
button.	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	icon index range = 0 - 9900 (a value of 0 is clear).
	Example:
	SEND_COMMAND Panel,"'^ICO-500.504&510.515,1&2,1'"
	Sets the icon for On and Off states for buttons with variable text ranges of 500-504 &
	510-515.
^IRM	Pulse the given IR channel for onTime in tenths of seconds. Delay offTime in tenths of a
Set the IR	second before the next IR pulse is allowed. ^IRM allows the command itself to specify the
	port number. ^IRM is needed because commands programmed on the panel itself can
channel.
	only be sent to a single port number. (currently this is defined as 1 only).
	Note: The port number of the IR will be the port number assigned in TPD4.
	Syntax:
	"'^IRM-<port>,<channel>,<onTime>,<offTime>'"
	Variable:
	port = User-defined port on the device (panel).
	channel = 1 - 255 (channel to pulse).
	onTime = 1/10th of a second.
	offTime = 1/10th of a second.
	Example:
	SEND_COMMAND Panel,"'^IRM-10,5, 20, 10'"
	Sets the port 10 IR channel 5 on time to 1 second and off time to 2 seconds.

128 MVP-5200i Modero Viewpoint Widescreen Touch Panel