AMX MVP-5200i manual Confirm the Installation of the USB Driver on the PC

Appendix B: Wireless Technology

Step 2: Confirm the Installation of the USB Driver on the PC

The first time each AMX touch panel is connected to the PC, it is detected as a new hardware device and the panel-specific USBLAN driver becomes associated with it. Each time thereafter, the panel is "recognized" as a unique USBLAN device and the association to the driver is done in the background. When the panel is detected for the first time, some user intervention is required during the association between panel and driver.

1.After the installation of the USB driver has been completed, confirm the proper installation of the large Type-A USB connector to the PC's USB port, and restart your machine.

If the panel is already powered, continue with steps 3. The panel MUST be powered and configured for USB communication before connecting the mini-USB connector to the panel’s Program Port.

2.Feed power to the docked MVP-5200i by connecting the appropriate power supply to the Charging Station.

3.After the panel powers up, access the firmware setup pages by selecting the option from the main page.

4.Select Protected Setup > System Settings (located on the lower-left) to open the System Settings page.

5.Toggle the blue Type field (from the Master Connection section) until the choice cycles to USB.

The connection remains RED after changing the communication from Ethernet to USB until the panel is rebooted.

Once the panel restarts, the connection turns a dark green until connected to an active USB cable.

6.Press the Back button on the touch panel to return to the Protected Setup page.

7.Press the on-screen Reboot button to both save any changes and restart the panel. Remember that the panel’s connection type must be set to USB prior to rebooting the panel and prior to inserting the USB connector.

8.Only AFTER the unit displays the first panel page should you then insert the mini-USB connector into the Program Port on the panel.

It may take a minute for the panel to detect the new connection and send a signal to the PC (indicated by a green System Connection icon). If this is your first time installing the USB driver, a USB driver installation popup window appears on the PC.

9.Complete the USB driver installation process by clicking Yes and then installing the new AMX USB LAN LINK when told that a new USB device was found. This action accepts the installation of the new AMX USB driver.

10.Reboot the panel. Once restarted, the panel is now configured to communicate directly with the PC.

The mini-USB connector MUST be then plugged into an already active panel before the PC can recognize the connection and assign an appropriate USB driver. This driver is part of both the NetLinx Studio and TPDesign4 software application installations.

11.Launch the Certificate Upload Utility and confirm the utility has detected the new USB connection to the panel:

Click on the Local Address field's drop-down arrow.

Confirm the new USB entry shows up in the list as: 10.XX.XX.1.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 169