AMX MVP-5200i manual Button Commands Cont, Programming, BMF-vt addr range,button states range,data

Programming

"^" Button Commands (Cont.)

^BMF

Set any/all button parameters by sending embedded codes and data.

Syntax:

"'^BMF-<vt addr range>,<button states range>,<data>'"

Variables:

variable text address char array = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).

level range = 1 - 600 (level value is 1 - 65535). data:

’%B<border style>’ = Set the border style name. See the Border Styles and Programming Numbers table on page 110.

’%B’,<border 0-27,40,41> = Set the borer style number. See the Border Styles and Programming Numbers table on page 110.

’%DO<1-5><1-5><1-5><1-5><1-5> = Set the draw order. Listed from bottom to top. Refer to the ^BDO command on page 115 for more information.

’%F’,<font 1-8,10,11,20-29,32-xx> = Set the font. See the Default Font Styles and ID Numbers table on page 109.

’%F<font 01-08,10,11,20-29,32-xx>’ = Set the font. See the Default Font Styles and ID Numbers table on page 109.

’%MI<mask image>’ = Set the mask image. Refer to the ^BMI command on page 120 for more information.

’%T<text >’ = Set the text using ASCII characters (empty is clear). ’%P<bitmap>’ = Set the picture/bitmap filename (empty is clear).

’%I’,<icon 01-9900, 0-clear>’ = Set the icon using values of 01 - 9900 (icon numbers are assigned in the TPDesign4 Resource Manager tab - Slots section).

’%I<icon 01-9900, 0-clear>’ = Set the icon using values of 01 - 9900 (icon numbers are assigned in the TPDesign4 Resource Manager tab - Slots section).

’%J’,<alignment of text 1-9> = As shown the following telephone keypad alignment chart:

0

1	2	3	Zero can be used for an absolute position
4	5	6
7	8	9

’%JT<alignment of text 0-9>’ = As shown the above telephone keypad alignment chart, BUT the 0 (zero) is absolute and followed by ’,<left>,<top>’

’%JB<alignment of bitmap/picture 0-9>’ = As shown the above telephone keypad alignment chart BUT the 0 (zero) is absolute and followed by ’,<left>,<top>’

’%JI<alignment of icon 0-9>’ = As shown the above telephone keypad alignment chart, BUT the 0 (zero) is absolute and followed by ’,<left>,<top>’

118 MVP-5200i Modero Viewpoint Widescreen Touch Panel