GE IM-6 installation instructions Water Valve Assembly Installation Instructions L, Cabinet leg

Installation Instructions

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS L

Are these the right instructions for your model? Follow the Installation Instructions indicated by the label on the back of the refrigerator— C F G H J K L M N P Q R S or T

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

• CAUTION – Unplug the Refrigerator. To eliminate the danger of electric shock during installation, you must unplug the refrigerator from its electrical outlet .

TOOLS YOU WILL NEED

Flat blade and Phillips	Pliers	Sharp knife
screwdrivers

1/4″ and 5/16″ Nutdrivers

1REMOVE THE COVER

At the bottom rear of the refrigerator, remove the screw(s) holding the access cover.

Bend the cover back for access to the compartment .

Be sure to save the screws as the access cover must be reinstalled later to ensure your refrigerator will function properly.

2ATTACH THE WATER VALVE

•Locate the female connector plug (C) which is attached to the cabinet by a metal or plastic clip. Remove the clip by removing the screw.

Metal or plastic clip

C

•Plug the female connector (C) onto the male terminals on the water valve (4). Either wire can go on either terminal.

C

4

•Fasten the water valve to the cabinet by driving the hex-head screw (13) from the kit into the hole

in the cabinet leg.

13

36