GE IM-6 Water Valve Assembly Installation Instructions R, Locate the female connector plug C

Installation Instructions

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS R

Are these the right instructions for your model? Follow the Installation Instructions indicated by the label on the back of the refrigerator— C F G H J K L M N P Q R S or T

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•CAUTION – Unplug the

Refrigerator. To eliminate the danger of electric shock during installation, you must unplug the refrigerator from its electrical outlet .

2ATTACH THE WATER VALVE

• Locate the female connector plug (C).

C

TOOLS YOU WILL NEED

Flat blade and Phillips	Pliers	Sharp knife
screwdrivers

1/4″ and 5/16″ Nutdrivers

1REMOVE THE COVER

At the bottom rear of the refrigerator, remove the screws holding the access cover.

Bend the cover back to access the compartment .

Be sure to save the screws as the access cover must be reinstalled later to ensure that your refrigerator will function properly.

•Plug the female connector (C) onto the male terminals on the water valve (4). Either wire can go on either terminal.

C

4

•Fasten the water valve to the cabinet using the hex-head screw (13) from the kit.

13

56