GE IM-6 Install the Mounting Screws, RE-INSTALL the Shelf Support BUCKET, Shelf and Basket

Installation Instructions

4INSTALL THE MOUNTING SCREWS

•Skip to Step 5 if screws are already in place in the freezer side wall.

•Install two self-tapping Phillips

head screws (14) from the kit in the holes in the side wall. The screw heads should extend about 1/2″ (13 mm) from the side wall.

5INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

7MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube shipped with the refrigerator fits in the fill cup opening (E). Hang the icemaker on the two mounting screws (14) in the side wall.

Make sure:

•The power cord is still firmly in the socket.

•The fill tube extends into the fill cup opening on the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator).

•The icemaker mounting screws are located in the uppermost position of the mounting slots.

•The icemaker is level.

•The icemaker power switch is set to OFF.

THEN SECURELY TIGHTEN THE ICEMAKER MOUNTING SCREWS.

14

E

6PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker power cord plug into the socket on the rear wall, making sure the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place. Make sure the power cord is still in the hook on the back of the icemaker.

Hook

8RE-INSTALL THE SHELF SUPPORT,

BUCKET, SHELF AND BASKET

Replace the center vertical shelf support, ice bucket, chiller shelf and storage basket by reversing the steps in Step 1.

9ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

10KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.

59