Power cord plug D into, Socket on the rear

Installation Instructions

4POWER CORD ADAPTER

(on some models)

There is a power cord adapter (18) included with

the kit. Visually inspect to see if the power cord on the icemaker matches the socket on the rear wall of the freezer compartment. If needed, secure the adapter to the side of the icemaker power cord. When connecting the adapter to the power cord, make sure the seal is in place between the connectors, and ensure that both connector locks are snapped in place. Secure the power cord adapter to the icemaker by putting it into the hook at the back of the icemaker and attaching it to the icemaker with a wire tie (20).

Locks

Hook

Seal

7MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube (16) fits in the fill cup opening (E). Hang the icemaker on the two mounting screws (C).

Make sure:

•The power cord is still firmly in the socket.

•The fill tube (16) extends into the fill cup opening on the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator).

THEN SECURELY TIGHTEN THE ICEMAKER MOUNTING SCREWS.

	16
C	E
	E

5INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

INSTALL THE ICE BUCKET

Install the freezer shelf in the lowest position. Place the ice bucket (11) on the shelf under the icemaker.

Make sure the icemaker power switch is set to OFF.

PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker