GE IM-6 installation instructions Install the Icemaker Fill CUP, Two screws

Installation Instructions

6INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

7PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker power cord plug into the socket on the side wall, making sure the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place.

8MOUNT THE ICEMAKER

•Lift the icemaker so the fill tube extension (10) fits in the fill cup opening (D). Hang the icemaker on

the two screws.

Make sure:

•The power cord is still firmly in the socket.

•The fill tube extension (10) extends into the fill cup opening at the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator).

•The icemaker mounting screws are located in the uppermost position of the mounting slots.

THEN SECURELY TIGHTEN THE ICEMAKER MOUNTING SCREWS.

10

D

9INSTALL THE ICE BUCKET

Place the ice bucket (11) under the icemaker. Make sure the icemaker power switch is in the OFF position.

11

10

ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

11

KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.

39