Installation Instructions

6POWER CORD ADAPTER

(on some models)

There is a power cord adapter (18) included with

the kit. Visually inspect to see if the power cord on the icemaker matches the socket on the side wall of the freezer compartment. If needed, secure the adapter to the side of the icemaker power cord. When connecting the adapter to the power cord, make sure the seal is in place between the connectors, and ensure that both connector locks are snapped in place. Secure the power cord adapter to the icemaker by putting it into the hook at the back of the icemaker and attaching it to the icemaker with a wire tie (20).

Locks

Hook

Seal

9MOUNT ICEMAKER

Lift the icemaker so the fill tube extension (10) fits in the fill cup opening (C). Hang the icemaker on the two mounting screws (A).

Make sure:

The power cord is still firmly in the socket.

The fill tube extension (10) is still in the fill cup opening. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator.)

The icemaker mounting screws are located in the uppermost position of the mounting slots.

THEN TIGHTEN THE ICEMAKER MOUNTING SCREWS SECURELY.

 

10

A

C

 

7INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (17) into the icemaker as shown.

17

10

INSTALL THE ICE BUCKET

Put the ice bucket (11) directly under the icemaker (to the left and all the way to the rear of the shelf under the icemaker).

Make sure the icemaker

11

power switch is set to

 

OFF.

 

8PLUG IN THE ICEMAKER

Hold the icemaker in the freezer compartment as shown. Insert the icemaker power cord plug (D) into the socket, making sure the prongs and holes are matched. If holes do not match, see Step 6. Press the plug firmly into the socket .

D

11ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

12KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Water Valve Assembly section.

19

Page 20
Image 20
GE IM-6 installation instructions Mount Icemaker, Make sure the icemaker Power switch is set to