Fill Tube

Before you call for service…

Troubleshooting Tips

Problem

Possible Causes

What To Do

 

 

 

Leaking water around

Foam in the fill cup from

the fill cup

installing the fill tube.

If the fill tube was installed by sliding it through the back of the refrigerator, it may have picked up pieces of foam as it was pushed through. This foam can interfere with the water flow in the fill cup. Check the fill cup to make sure

there are no foam pieces.

Fill tube not correctly seated in fill cup.

Check that the fill tube is correctly inserted in the fill cup opening. See Mount the icemaker.

Fill Tube

Fill Cup

 

 

 

(Appearance may vary)

 

 

 

 

 

 

 

Leaking water

House supply not properly

• Check that the house supply is firmly attached to the water

behind refrigerator

connected to the water valve.

valve. See Water line installation instructions.

 

 

 

 

 

 

 

 

 

Water line not connected to the

• Check that the plastic

 

 

 

 

 

 

water tube inlet.

water line running from

 

 

 

 

 

 

 

the valve to the water

Water Tube Inlet

 

 

tube inlet is firmly

Hose Clamp

 

 

 

 

 

attached with the hose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clamp. See Connect the

Water Line

 

 

 

 

 

 

 

water line.

 

 

 

 

 

 

 

 

 

 

 

 

Slow ice/freezer not

Door left open.

• Check to see if package is holding door open.

cold enough

 

 

 

 

 

 

 

Temperature control not

• See About the Temperature Control.

 

set cold enough.

Ice cubes too small/

Water shutoff valve connecting

slow ice

refrigerator to house water line

 

may be clogged.

We recommend drilling a 1/4hole

in the water pipe to connect the water shutoff valve. Failure to drill a 1/4hole may result in reduced ice production or smaller cubes. See Installing the water line.

Drill 1/4

Hole in

Water Pipe

 

Water line is kinked.

• Check that the plastic

 

 

water line running from

 

 

the valve to the water tube

 

 

inlet is not kinked. See

 

 

Mount the icemaker. A kink

 

 

in the line will restrict water

 

 

flow to the icemaker.

 

 

Adhesive-backed Fasteners

 

 

for Water Tube

Frequent “buzzing” sound

Normal operation.

• During normal opeation, the water valve will “buzz”

 

 

when the icemaker fills with water.

4

Page 5
Image 5
GE IM-6 Fill tube not correctly seated in fill cup, House supply not properly, Connected to the water valve